The Z – Wave Smoke & CO Combination Alarm – Battery Operated (Model # ZCOMBO / ZCOMBO-G) ZCOMBO has two versions: first and second generation. The second-generation model uses updated 500 series Z – wave protocols. Second-generation models have a QR code printed on the back to assist with pairing to your Ring smart home hub (not included).
First Alert Pairing Process: Go to the abode web app ( https://my.goabode.com) In the Devices section, click the +. In the Add Devices dialog, select the Other Devices tab. Insert the Battery into the smoke detector and then press and hold the Test Button for 5 Seconds while you slide the battery tray into the unit.
Power up the controller and press the function button in one time (do not hold this button in). The controller will beep one time when it sends the gateway the signal. The gateway will exclude the device with 10 seconds. Pairing and excluding the First Alert Smoke/CO detector (COMBO) Z-Wave .
Pair the ZCOMBO to your Samsung SmartThings Hub To get started, remove your ZCOMBO alarm from its packaging and open the SmartThings app on your mobile device. The SmartThings app will guide you through the setup process. In the SmartThings mobile app*, tap the Plus (+) icon to add a device. Select First Alert. Choose a Hub for the device and tap Next.
The alarm links to your smart home hub via Z – wave wireless protocol, while the hub connects to the internet and provides notifications. If your smart home hub supports Z – wave protocols, a Z – wave alarm is probably right for you. First Alert offers 2 Z – Wave alarms: The Z – Wave Smoke Alarm – Battery Operated (Model #ZSMOKE), 3/7/2019 · Join the Z – Wave Network. 1. Slide battery door open and insert batteries. 2. From the Hubitat Web Interface home page, select Z – Wave , then Start Z – Wave Inclusion on the Device Discovery page. 3. Press and hold the test button. Keep it held down as you slide the battery drawer closed. You may then release the button and, You’ll need that first. Next, once Z-wave is set up, and you have a network_key defined so you can connect secure devices, then you just go into the Z-wave control panel on Home Assistant, click on Add Node Secure and follow the instructions on the Z-combo units to pair them up.
11/24/2020 · Among First Alert ’s smart offerings is the battery powered 2nd Gen Z – Wave Combo. This combines the smoke alarm with a carbon monoxide sensor as well, also a must have for any home using gas appliances. This device offers an affordable connected alarm with a good pedigree of reliability. Lets take a look at the details.
11/26/2020 · First Alert Z – Wave Smoke Detector & Carbon Monoxide Alarm, Works with Ring Alarm, 2nd Generation – – Amazon.com $34.39 Pairing it to my OpenHab2 was fairly easy, but it isn’t reporting any data.
8/8/2015 · It’s a shame that First Alert doesn’t combine One Link with Z – Wave in a new model. Boatsman (Boatsman) August 8, 2015, 10:06pm #10
